Yealink WIFI Capable Phones
This article illustrates how to use the Yealink USB Wi-Fi dongle WF40 and WF50 to connect compatible Yealink phones to a wireless network. With the help of the Yealink WF40 USB dongle, compatible Yealink phones can quickly and easily connect to a wireless network. The Yealink WF50 offers maximum throughput and reliability to the IEEE 802.11a/b/g/n/ac standard.
Below are the Yealink phone models that support WiFi:
- T42S and T46S could support WF40 with a frequency range of 2.4GHz.
- T42S, T46S, and T48S could support the WF50 (2.4GHz or 5GHz) and WF40 dongle (2.4GHz).
- T53W, T54W, T57W, T58W, and VP59 could support built-in WiFi, and do not need a WiFi dongle.
- T4xU could support the WF50 (2.4GHz or 5GHz) and WF40 dongle (2.4GHz).
Required firmware version 66.84.25.3
Connecting Yealink phones to WiFi
To start using the Yealink WF40 or WF50 WiFi dongle, follow the steps below to proceed:
- Disconnect the Ethernet cable to enable WiFi connectivity.
- Insert the WiFi USB dongle into the USB port on the back of the phone.
- You will be prompted to scan and connect to available WiFi networks. or, you can do this manually by going toMenu > Settings > Basic Settings > WiFi
Select Available Networks , and press OK.
Select the desired WiFi network and press Connect.
- Enter the password, and press OK
Allow a few seconds for the phone to connect to your Wi-Fi connection.
